Thread Tapping Added to Cut Steel Plate Parts.
Companion page for internal threads on prepared holes — typically coordinated with drilling & tapping. Send basic requirements first through the contact form; drawings are not uploaded on this website and can be shared later by email attachment after your inquiry is received.
Thread tapping capability reference.
Tapping is applied to prepared holes — feasibility reviewed per material, thickness, and thread spec.
| Item | Specification | Notes |
|---|---|---|
| Maximum thread size | M16 typical | Based on hole size and material — confirmed at quotation |
| Typical prepared hole | Drilled or cut hole | Hole spec confirmed at quotation |
| Thread quality check | Go/no-go or gauge | Critical threads confirmed before production |
| Combined with cutting | When in scope | Single order handling where confirmed |
| Combined with drilling | When in scope | Drill then tap in sequence |
Drill, then tap — one workflow.
Send basic requirements first
Share thread size, depth, and quantity through the contact form — not through on-page drawing upload.
Hole preparation
Holes are drilled or cut to correct diameter before tapping when both steps are in scope.
Manual scope review
Drawing detail follows by email attachment after your inquiry is received. No drawing files are stored on this website.
Inspection before shipment
Thread fit and hole position checked before packing when in agreed scope.
Start at drilling & tapping for hole workflow.
This companion page supports tapped-hole detail. For bolt patterns and combined hole + thread scope, open the primary detail page first.
View Drilling & Tapping
Related capability pages.
Capabilities hub → · Secondary processing → · Drilling & tapping → · Quotation process → · Contact →