Cleaned Cut Surfaces for Usable Steel Plate Parts.
Surface condition after cutting affects welding, coating, assembly, or direct use. Send basic requirements first through the contact form — drawings are not uploaded on this website and can be shared later by email attachment after your inquiry is received.
What we do to cut edges and surfaces.
Scope confirmed during manual feasibility review — not automatic on every cutting order.
01
Deburring
Removal of burrs and sharp edges from cut surfaces when in agreed scope.
02
Slag Removal
Flame cut edge slag removal when required before inspection and packing.
03
Grinding
Edge grinding for weld preparation or fit-up when specified.
06
Custom Requirements
Surface finish needs confirmed at quotation — manual review, not instant quote.
What to expect from each cutting method.
Surface quality varies by cutting method and plate thickness — confirmed during manual review.
| Method | Surface Quality | Typical Finish |
|---|---|---|
| Laser (thin plate) | Surface quality is controlled according to material, thickness and project requirements. typical | Clean, minimal burr |
| Flame cutting | Surface quality is controlled according to material, thickness and project requirements. typical | Slag removal may be needed |
| After grinding | Surface quality is controlled according to material, thickness and project requirements. typical | Smoother, weld-ready |
| After shot blasting | Sa2.5 typical | Coating-ready surface |
Related capability pages.
Capabilities hub → · Secondary processing → · Shot blasting → · Beveling → · Inspection → · Quotation → · Contact →
No on-page drawing upload. No drawing files are stored on this website.